HP Designjet L25500 Printer Series - Maintenance and troubleshooting guide (second edition)

Check the file system
It is possible to check the integrity of the file system on the printer's hard disk, and automatically correct any
errors. You are recommended to do this about once every six months, or if you notice any trouble in
accessing files on the hard disk.
To execute the file system check, go to the front panel and select the
icon, then select File system check.
If the printer is aware of damage to the file system, for instance after a severe software problem, it may start
a file system check automatically. This can take about half an hour.
Check printer usage statistics
To check your printer-usage, statistics are available.
NOTE: The accuracy of the usage statistics is not guaranteed.
Printer statistics with the Embedded Web Server
1. Access the Embedded Web Server (see the User's guide).
2. Go to the Usage page on the Main tab.
Printer alerts
The printer can communicate two types of alerts:
●
Errors: When the printer is unable to print.
●
Warnings: When the printer needs attention for an adjustment, such as a calibration, preventive
maintenance or ink cartridge replacement.
Printer alerts appear in the front panel and in the Embedded Web Server.
●
Front-panel display: The front panel shows only one alert at a time, which is judged to be the most
important. It generally requires the user to press the OK key for confirmation, but in the case of a
ENWW Check the file system 7