HP Designjet L25500 Printer Series - Maintenance and troubleshooting guide (second edition)

4. With the same dry brush, remove ink deposits from the platen surface.
5. Use a clean, absorbent lint-free cloth that has been slightly dampened with isopropyl alcohol to wipe
loosened ink deposits from the platen.
NOTE: Isopropyl alcohol is not provided in the User Maintenance Kit.
CAUTION: Do not use commercial cleaners or abrasive cleaners. Do not wet the platen directly,
because you will leave too much moisture behind.
6. Use the damp cloth to clean the cutter ramp.
7. Use a dry cloth to clean the exposed part of the wheels. Ideally, you should clean the entire
circumference of these wheels.
8. Remove the isopropyl alcohol and the cloth from the vicinity of the printer.
9. Wait three or four minutes to let the alcohol evaporate, before turning on the printer and reloading the
substrate.
ENWW Clean the platen 17