Cisco Nexus B22 Fabric Extender for HP Getting Started Guide

15
Cisco Nexus B22 Fabric Extender for HP Getting Started Guide
Configuring the Cisco Nexus B22 Fabric Extender for HP
Note The first show command above shows the SFP+ transceiver that is plugged into the parent switch
interface. The second show command displays the SFP+ transceiver that is plugged into the uplink port
on the Fabric Extender.
Displaying Chassis Management Information
To display configuration information used on the switch supervisor to manage the Fabric Extender,
perform one of these tasks:
This example shows how to display the module information about all connected Fabric Extender units:
switch(config-fex)# show module fex
FEX Mod Ports Card Type Model Status.
--- --- ----- ---------------------------------- ------------------ -----------
100 1 16 Fabric Extender 16x10GE + 8x10G Module N2K-B22HP-P present
FEX Mod Sw Hw World-Wide-Name(s) (WWN)
--- --- -------------- ------ -----------------------------------------------
100 1 5.0(3)N2(1) 0.501 --
FEX Mod MAC-Address(es) Serial-Num
--- --- -------------------------------------- ----------
100 1 e8b7.484b.e880 to e8b7.484b.e88f FOC1514256S
switch(config-fex)#
switch(config-fex)# show module fex 100
FEX Mod Ports Card Type Model Status.
--- --- ----- ---------------------------------- ------------------ -----------
100 1 16 Fabric Extender 16x10GE + 8x10G Module N2K-B22HP-P present
FEX Mod Sw Hw World-Wide-Name(s) (WWN)
--- --- -------------- ------ -----------------------------------------------
100 1 5.0(3)N2(1) 0.501 --
FEX Mod MAC-Address(es) Serial-Num
--- --- -------------------------------------- ----------
100 1 e8b7.484b.e880 to e8b7.484b.e88f FOC1514256S
switch(config-fex)#
This example shows how to display the inventory information about a specific Fabric Extender unit:
switch(config-fex)# show inventory fex 100
NAME: "FEX 100 CHASSIS", DESCR: "N2K-B22HP-P CHASSIS"
PID: N2K-B22HP-P , VID: V00 , SN: FOC1516ZZLS
NAME: "FEX 100 Module 1", DESCR: "Fabric Extender Module: 16x10GE, 8x10GE Supervisor"
PID: N2K-B22HP-P , VID: V00 , SN: FOC1514256S
switch(config-fex)#
Command Purpose
switch# show diagnostic result fex
chassis
Displays results from the diagnostic test for a Fabric
Extender chassis.
switch# show inventory fex chassis
Displays inventory information for a Fabric Extender
chassis.
switch# show module fex chassis
Displays module information about a Fabric Extender
chassis.