Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Command Reference Guide

2-92
Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Command Reference Guide
380265-003
Chapter 2 CGESM Switch Cisco IOS Commands
dot1x mac-auth-bypass
Examples This example shows how to enable MAC authentication bypass and to configure the switch to use EAP
for authentication:
Switch(config-if)# dot1x mac-auth-bypass eap
You can verify your settings by entering the show dot1x [interface interface-id] privileged EXEC
command.
Related Commands Command Description
show dot1x [interface
interface-id]
Displays IEEE 802.1x status for the specified port.