Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Command Reference Guide

2-362
Cisco Gigabit Ethernet Switch Module for the HP p-Class BladeSystem Command Reference Guide
380265-003
Chapter 2 CGESM Switch Cisco IOS Commands
show ip igmp snooping
ip igmp snooping tcn Configures the IGMP topology change notification
behavior.
ip igmp snooping tcn flood Specifies multicast flooding as the IGMP spanning-tree
topology change notification behavior.
ip igmp snooping vlan
immediate-leave
Enables IGMP snooping immediate-leave processing on a
VLAN.
ip igmp snooping vlan mrouter Adds a multicast router port or configures the multicast
learning method.
ip igmp snooping vlan static Statically adds a Layer 2 port as a member of a multicast
group.
show ip igmp snooping groups Displays the IGMP snooping multicast table for the switch.
show ip igmp snooping mrouter Displays IGMP snooping multicast router ports for the
switch or for the specified multicast VLAN.
show ip igmp snooping querier Displays the configuration and operation information for
the IGMP querier configured on a switch.
Command Description