Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Command Reference Guide

2-418
Cisco Gigabit Ethernet Switch Module for the HP p-Class BladeSystem Command Reference Guide
380265-003
Chapter 2 CGESM Switch Cisco IOS Commands
show mvr members
This is an example of output from the show mvr members ip-address command. It displays the
members of the IP multicast group with that address:
Switch# show mvr members 239.255.0.2
239.255.003.--22 ACTIVE Gi0/1(d), Gi0/2(d), Gi0/3(d),
Gi0/4(d), Gi0/5(s)
Related Commands Command Description
mvr (global configuration) Enables and configures multicast VLAN registration on the
switch.
mvr (interface configuration) Configures MVR ports.
show mvr Displays the global MVR configuration on the switch.
show mvr interface Displays the configured MVR interfaces, status of the specified
interface, or all multicast groups to which the interface belongs
when the members keyword is appended to the command.