Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Command Reference Guide

2-420
Cisco Gigabit Ethernet Switch Module for the HP p-Class BladeSystem Command Reference Guide
380265-003
Chapter 2 CGESM Switch Cisco IOS Commands
show pagp
Hello Partner PAgP Learning Group
Port Flags State Timers Interval Count Priority Method Ifindex
Gi0/11 SC U6/S7 H 30s 1 128 Any 16
Gi0/12 SC U6/S7 H 30s 1 128 Any 16
This is an example of output from the show pagp 1 neighbor command:
Switch> show pagp 1 neighbor
Flags: S - Device is sending Slow hello. C - Device is in Consistent state.
A - Device is in Auto mode. P - Device learns on physical port.
Channel group 1 neighbors
Partner Partner Partner Partner Group
Port Name Device ID Port Age Flags Cap.
Gi0/11 switch-p2 0002.4b29.4600 Gi0/11 9s SC 10001
Gi0/12 switch-p2 0002.4b29.4600 Gi0/12 24s SC 10001
Related Commands Command Description
clear pagp Clears PAgP channel-group information.