Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Command Reference Guide

2-442
Cisco Gigabit Ethernet Switch Module for the HP p-Class BladeSystem Command Reference Guide
380265-003
Chapter 2 CGESM Switch Cisco IOS Commands
show version
show version
Use the show version user EXEC command to display version information for the hardware and
firmware.
show version [ | {begin | exclude | include} expression]
Syntax Description
Command Modes User EXEC
Command History
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show version command:
Note Though visible in the show version output, the configuration register information is not supported on
the switch.
Switch> show version
Cisco IOS Software, CGESM Software (CGESM-I6L2-M), Version 12.2(25)SE1, RELEASE SOFTWARE
(fc)
Copyright (c) 1986-2004 by Cisco Systems, Inc.
Compiled Mon 06-Dec-04 22:52 by yenanh
ROM: Bootstrap program is CGESM boot loader
BOOTLDR: cgesm Boot Loader (CGESM-HBOOT-M), Version 12.2 [mbutts-fall_04 102]
Halberd_A uptime is 1 week, 1 day, 27 minutes
System returned to ROM by power-on
System image file is "flash:cgesm-i6l2-mz.122-25.SE1/cgesm-i6l2-mz.122-25.SE1.bin"
cisco 371098-001 (PowerPC405) processor (revision 01) with 118784K/12280K bytes of memory.
Processor board ID FHH083800HY
Last reset from power-on
3 Virtual Ethernet interfaces
24 Gigabit Ethernet interfaces
The password-recovery mechanism is disabled.
512K bytes of flash-simulated non-volatile configuration memory.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(25)SE1 This command was introduced.