Manualshelf

Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Command Reference Guide

ManualsBrandsHP ManualsComputer AccessoriesCisco BLp-Class Ethernet Switch
51525354555657585960
2-25
Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Command Reference Guide
380265-003
Chapter 2 CGESM Switch Cisco IOS Commands
boot manual
boot manual
Use the boot manual global configuration command to enable manually booting the switch during the
next bootup cycle. Use the no form of this command to return to the default setting.
boot manual
no boot manual
Syntax Description This command has no arguments or keywords.
Defaults Manual booting up is disabled.
Command Modes Global configuration
Command History
Usage Guidelines The next time you reboot the system, the switch is in bootloader mode, which is shown by the switch:
prompt. To boot up the system, use the bootloader command, and specify the name of the bootable
image.
This command changes the setting of the MANUAL_BOOT environment variable. For more
information, see Appendix A, “CGESM Switch Bootloader Commands.”
Related Commands
Release Modification
12.2(25)SE1 This command was introduced.
Command Description
show boot Displays the settings of the boot environment variables.