Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Command Reference Guide

A-18
Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Command Reference Guide
380265-003
Appendix A CGESM Switch Bootloader Commands
reset
reset
Use the reset bootloader command to perform a hard reset on the system. A hard reset is similar to
power-cycling the switch, clearing the processor, registers, and memory.
reset
Syntax Description This command has no arguments or keywords.
Command Modes Bootloader
Command History
Examples This example shows how to reset the system:
switch: reset
Are you sure you want to reset the system (y/n)?y
System resetting...
Related Commands
Release Modification
12.2(25)SE1 This command was introduced.
Command Description
boot Loads and boots an executable image and enters the command-line interface.