Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Command Reference Guide

B-5

380265-003

Appendix B CGESM Switch Debug Commands

debug cluster

Use the debug cluster privileged EXEC command to enable debugging of cluster-specific events. Use

the no form of this command to disable debugging.

debug cluster {discovery | events | extended | hsrp | http | ip [packet] | members | nat | neighbors

| platform | snmp | vqpxy}

no debug cluster {discovery | events | extended | hsrp | http | ip [packet] | members | nat |

neighbors | platform | snmp | vqpxy}

Syntax Description

Defaults Debugging is disabled.

Command Modes Privileged EXEC

Command History

Usage Guidelines This command is available only on thecluster command switch.

The undebug cluster command is the same as the no debug cluster command.

Related Commands

discovery Display cluster discovery debug messages.

events Display cluster event debug messages.

extended Display extended discovery debug messages.

hsrp Display the Hot Standby Router Protocol (HSRP) debug messages.

http Display Hypertext Transfer Protocol (HTTP) debug messages.

ip [packet] Display IP or transport packet debug messages.

members Display cluster member debug messages.

nat Display Network Address Translation (NAT) debug messages.

neighbors Display cluster neighbor debug messages.

platform Display platform-specific cluster debug messages.

snmp Display Simple Network Management Protocol (SNMP) debug messages.

vqpxy Display VLAN Query Protocol (VQP) proxy debug messages.

Release Modification

12.2(25)SE1 This command was introduced.

Command Description

show debugging Displays information about the types of debugging that are enabled.

show cluster Displays the cluster status and a summary of the cluster to which the

switch belongs.