Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Hardware Installation Guide

2
Switch Installation
Overview
This chapter describes how to set up and install the switch and the SFP modules.
The setup and installation process includes the following tasks:
•
•
•
•
Installing the Switch and SFP Modules
Planning the Switch Configuration
Cabling the Switch
Accessing the Switch for the First Time
NOTE: For detailed information on configuring the switch, refer to the Cisco Gigabit Ethernet Switch
Module for HP BladeSystem p-Class Software Configuration Guide located on the HP website at
http://www.hp.com/support.
NOTE: For the latest firmware and documentation, refer to the HP website at
http://www.hp.com/support.
Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Hardware Installation Guide 2-1