Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Hardware Installation Guide

About This Guide
Where to Go for Additional Help
In addition to this guide, the following information sources are available at
http://www.hp.com/support:
• Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Software
Configuration Guide
• Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Command Reference
Guide
• Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class System Message
Guide
• Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Quick Setup
Instructions
• Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class SAN Connectivity Kit
Quick Setup Instructions
• Cisco Small Form-Factor Pluggable Modules Installation Instructions
Refer also to the Cisco IOS Release 12.2 documentation, which is located at:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/index.htm
Telephone Numbers
For the name of the nearest HP authorized reseller:
• In the United States, call 1-800-345-1518.
• In Canada, call 1-800-263-5868.
• In other locations, refer to
http://www.hp.com.
For HP technical support:
• In North America:
— Call 1-800-HP-INVENT (1-800-474-6836). This service is available 24 hours a day,
7 days a week. For continuous quality improvement, calls may be recorded or
monitored.
— If you have purchased a Care Pack (service upgrade), call 1-800-633-3600. For more
information about Care Packs, refer to
http://www.hp.com.
— Outside the United States and Canada, call the nearest HP Technical Support Phone
Center. For telephone numbers for worldwide Technical Support Centers, refer to
http://www.hp.com
viii Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Hardware Installation Guide