Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Release Notes, Cisco IOS Release 12.2(25)SE1

Documentation Notes

This section describes documentation notes related to this IOS release.

References to IOS Release Number

These documents refer to Release 12.2(25)SE. The correct release is Release 12.2(25)SE1.

•

Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Software

Configuration Guide, Cisco IOS Release 12.2(25)SE

Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Command Reference

Guide, Cisco IOS Release 12.2(25)SE

Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class System Message

Guide, Cisco IOS Release 12.2(25)SE

Open Caveats

These sections describe the open caveats with possible unexpected activity in this software

release:

“Open IOS Caveats”

• “Open Device Manager Caveats”

Open IOS Caveats

These severity 3 Cisco IOS configuration caveats apply to the CGESM switch:

•

CSCee08109

If a port-based ACL (PACL) is applied to an 802.1x-enabled port and the client is then

disconnected from that port, the PACL is not removed from the port.

There is no workaround.

CSCee12496

When the interface range interface configuration command is used to set a range of

ports to trusted mode by using the ip arp inspection trust command and some of those

ports are members of a channel-group, this error message might appear:

%PM-3-INTERNALERROR: Port Manager Internal Software Error (pd->physicalPort && pd-

>agPort == NULL: ../switch/pm/pm_port.c: 3865: pm_port_want_to_bundle)

There is no workaround.

CSCee22376

When an SNMP version 3 user is configured with the encrypted option and password, the

switch reloads when the MIB object usmUserAuthKeyChange is set.

The workaround is to configure a user without the encrypted option. (For example,

snmp-server user username groupname v3 auth md5 password.)

Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Release Notes, Cisco IOS Release 12.2(25)SE1 15