Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Release Notes, Cisco IOS Release 12.2(25)SE1

• CSCeg04311

When you power on or restart a switch that does not have a config.text file in flash

memory, the switch tries to get configuration files from a TFTP server. If the

configuration files are not found, the switch automatically configures the service config

global configuration command, which causes the switch to continue searching (in the

background) for the expected configuration files.

If the service config command does not find the configuration files, these error messages

appear:

%Error opening tftp://255.255.255.255/network-confg (Timed out)

%Error opening tftp://255.255.255.255/cisconet.cfg (Timed out)

%Error opening tftp://255.255.255.255/switch-confg (Timed out)

%Error opening tftp://255.255.255.255/ciscortr.cfg (Timed out)

These system messages also appear:

00:01:40: %SYS-4-CONFIG_RESOLVE_FAILURE: System config parse from

(tftp://255.255.255.255/network-confg) failed

00:01:40: %SYS-4-CONFIG_RESOLVE_FAILURE: System config parse from

(tftp://255.255.255.255/cisconet.cfg) failed

00:01:40: %SYS-4-CONFIG_RESOLVE_FAILURE: System config parse from

(tftp://255.255.255.255/switch-confg) failed

00:01:40: %SYS-4-CONFIG_RESOLVE_FAILURE: System config parse from

(tftp://255.255.255.255/ciscortr.cfg) failed

These messages are for information only. There is no problem with the switch operation.

Because the switch automatically configures the service config global configuration

command, it is in the switch startup-config file when you save the running-config file.

This command runs every time the switch is restarted, even if a config.text configuration

file is in the switch flash memory.

The workaround is to prevent these messages from being generated. To do this, enter the

switch configuration mode, and issue the no service config command. Save the

configuration to flash by using the copy running-config to startup-config command.

The preceding error and system messages no longer appear and do not appear when the

switch is restarted.

• CSCeg18016

A few commands are not supported on CGESM. Some of these commands show in the

status window but have no status.

There is no workaround.

Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Release Notes, Cisco IOS Release 12.2(25)SE1 17