Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Release Notes, Cisco IOS Release 12.2(25)SE1

• CSCef42734

When a new 802.1x session is started, the switch now purges old state information, which

prevents the switch from failing to authenticate due to stale State(24) field values.

• CSCef55486

When the 802.1x accounting feature is configured, the switch no longer loses

connectivity to the RADIUS server for an extended period of time, 802.1x transactions

no longer time out, and switch reloads no longer occur.

Related Documentation

These documents provide complete information about the switch and are available from the

HP web site:

http://www.hp.com/support

•

Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Release Notes

(part number 383623-001)

Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Software

Configuration Guide (part number 380261-001)

Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class System Message

Guide (part number 380260-001)

Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Hardware

Installation Guide (part number 380264-001)

Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Quick Setup

Instructions (part number 380263-001)

Cisco Small Form-Factor Pluggable Modules Installation Instructions

(part number 380-263-001)

HP BladeSystem p-Class SAN Connectivity Kit Quick Setup Instructions For Installing in

Cisco Gigabit Ethernet Switch Module (part number 380262-001)

Cisco IOS Release 12.2 documentation is available at

http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/index.html

Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Release Notes, Cisco IOS Release 12.2(25)SE1 21