Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Release Notes, Cisco IOS Release 12.2(25)SE1

Table 3: CGESM Switch Features and the Minimum Cisco IOS Release Required

Feature Minimum Cisco IOS

Release Required

Support for DSCP transparency 12.2(25)SE1

Support for VLAN-based QoS and hierarchical policy maps on SVIs 12.2(25)SE1

Device manager 12.2(25)SE1

Support for SSL version 3.0 for secure HTTP communication

(cryptographic images only)

12.2(25)SE1

802.1x accounting and MIBs (IEEE8021-PAE-MIB and

CISCO-PAE-MIB)

12.2(25)SE1

Flex Links 12.2(25)SE1

HTTP software upgrade (device manager only) 12.2(25)SE1

SFP module diagnostic-management interface 12.2(25)SE1

Smartports macros 12.2(25)SE1

Limitations and Restrictions

You should review this section before you begin working with the switch. These are known

limitations that will not be fixed, and there is not always a workaround. Some features might

not work as documented, and some features could be affected by recent changes to the switch

hardware or software.

This section contains these limitations:

• “Cisco IOS Limitations”

• “Device Manager Limitations and Restrictions”

Cisco IOS Limitations

These limitations apply to CGESM switch and are in the following sections:

• “Configuration”

• “Ethernet”

• “HSRP”

• “IP”

• “IP Telephony”

• “Multicasting”

• “QoS”

• “SPAN and RSPAN”

Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Release Notes, Cisco IOS Release 12.2(25)SE1 7