Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Release Notes, Cisco IOS Release 12.2(35)SE and later

383623-007

Documentation Updates

This example shows how to configure IEEE 802.1x authentication with web authentication as a fallback

method.

Switch(config) configure terminal

Switch(config)# ip admission name rule1 proxy http

Switch(config)# fallback profile fallback1

Switch(config-fallback-profile)# ip access-group default-policy in

Switch(config-fallback-profile)# ip admission rule1

Switch(config-fallback-profile)# exit

Switch(config)# interface gigabit1/0/1

Switch(config-if)# switchport mode access

Switch(config-if)# dot1x port-control auto

Switch(config-if)# dot1x fallback fallback1

Switch(config-if)# end

For more information about the ip admission name and dot1x fallback commands, see the command

reference for this release.

Updates to the Command Reference

These commands were added:

• dot1x fallback, page 26

• fallback profile, page 27

• ip admission, page 28

• ip admission name proxy http, page 29

• show fallback profile, page 30

Step 11

exit Return to privileged EXEC mode.

Step 12

show dot1x interface interface-id Verify your configuration.

Step 13

copy running-config startup-config (Optional) Save your entries in the configuration file.

Command Purpose