Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Release Notes, Cisco IOS Release 12.2(40)SE

22
Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Release Notes, Cisco IOS Release 12.2(40)SE
460160-001
Related Documentation
Changed System Messages
This system message has changed (both explanation and action).
Error Message EC-5-CANNOT_BUNDLE1: Port-channel [chars] is down, port [chars] will
remain stand-alone.
Explanation The aggregation port is down. The port remains standalone until the aggregation port is
up. The first [chars] is the EtherChannel. The second [chars] is the port number.
Recommended Action Ensure that the other ports in the bundle have the same configuration.
Related Documentation
These documents provide complete information about the switch and are available from the HP web site:
http://www.hp.com/support
• Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Release Notes
(part number 383623-001)
• Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Software Configuration Guide
(part number 380261-001)
• Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class System Message Guide
(part number 380260-001)
• Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Hardware Installation Guide
(part number 380264-001)
• Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Quick Setup Instructions
(part number 380263-001)
• Cisco Small Form-Factor Pluggable Modules Installation Instructions (part number 380-263-001)
• HP BladeSystem p-Class SAN Connectivity Kit Quick Setup Instructions For Installing in Cisco
Gigabit Ethernet Switch Module (part number 380262-001)
Cisco IOS Release 12.2 documentation is available at
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/index.html