Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Release Notes Cisco IOS Release 12.2(44)SE1 and later

14
Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Release Notes, Cisco IOS Release 12.2(44)SE and Later
464831-005
Open Caveats
References to Cisco IOS Release 12.2(25)SE
These older documents refer to Release 12.2(25)SE. The correct release is Release 12.2(25)SE1.
• Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Software Configuration Guide,
Cisco IOS Release 12.2(25)SE
• Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Command Reference Guide,
Cisco IOS Release 12.2(25)SE
• Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class System Message Guide, Cisco
IOS Release 12.2(25)SE
Open Caveats
These sections describe the open caveats with possible unexpected activity in this software release:
• “Open IOS Caveats” section on page 14
• “Open Device Manager Caveats” section on page 16
Open IOS Caveats
These severity 3 Cisco IOS configuration caveats apply to the CGESM switch:
• CSCee08109
If a port-based ACL (PACL) is applied to an 802.1x-enabled port and the client is then disconnected
from that port, the PACL is not removed from the port.
There is no workaround.
• CSCeg04311
When you power on or restart a switch that does not have a config.text file in flash memory, the
switch tries to get configuration files from a TFTP server. If the configuration files are not found,
the switch automatically configures the service config global configuration command, which causes
the switch to continue searching (in the background) for the expected configuration files.
If the service config command does not find the configuration files, these error messages appear:
%Error opening tftp://255.255.255.255/network-confg (Timed out)
%Error opening tftp://255.255.255.255/cisconet.cfg (Timed out)
%Error opening tftp://255.255.255.255/router-confg (Timed out)
%Error opening tftp://255.255.255.255/ciscortr.cfg (Timed out)
These system messages also appear:
00:01:40: %SYS-4-CONFIG_RESOLVE_FAILURE: System config parse from
(tftp://255.255.255.255/network-confg) failed
00:01:40: %SYS-4-CONFIG_RESOLVE_FAILURE: System config parse from
(tftp://255.255.255.255/cisconet.cfg) failed
00:01:40: %SYS-4-CONFIG_RESOLVE_FAILURE: System config parse from
(tftp://255.255.255.255/switch-confg) failed
00:01:40: %SYS-4-CONFIG_RESOLVE_FAILURE: System config parse from
(tftp://255.255.255.255/ciscortr.cfg) failed
These messages are for information only. There is no problem with the switch operation.