Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Release Notes, Cisco IOS Release 12.2(46)SE

501396-001

Documentation Updates

Error Message %PM-6-EXT_VLAN_ADDITION: Extended VLAN is not allowed to be configured

in VTP CLIENT mode.

Explanation

The switch did not add a VLAN in VTP client mode.

Recommended Action Copy the message exactly as it appears on the console or in the system log.

Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to

look for similar reported problems. If you still require assistance, open a case with the TAC, or

contact your Cisco technical support representative, and provide the representative with the gathered

information. For more information about these online tools and about contacting Cisco, see the

“Error Message Traceback Reports” section in the system message guides.

Error Message SPANTREE-6-PORTADD_ALL_VLANS: [chars] added to all Vlans

Explanation

The interface has been added to all VLANs. [chars] is the added interface.

Recommended Action No action is required.

Error Message SPANTREE-6-PORTDEL_ALL_VLANS: [chars] deleted from all Vlans

Explanation

The interface has been deleted from all VLANs. [chars] is the deleted interface.

Recommended Action No action is required.

Error Message SW_VLAN-6-VTP_DOMAIN_NAME_CHG: VTP domain name changed to [chars].

Explanation

The VLAN Trunking Protocol (VTP) domain name was changed through the

configuration to the name specified in the message. [chars] is the changed domain name.

Recommended Action No action is required.

Error Message VQPCLIENT-2-TOOMANY: Interface [chars] shutdown by active host limit.

Explanation

The system has shut down the specified interface because too many hosts have requested

access to that interface. [chars] is the interface name.

Recommended Action To enable the interface, remove the excess hosts, and enter the no shutdown

interface configuration command.

Error Message VQPCLIENT-3-VLANNAME: Invalid VLAN [chars] in response.

Explanation

The VLAN membership policy server (VMPS) has specified a VLAN name that is

unknown to the switch. [chars] is the VLAN name.

Recommended Action Ensure that the VLAN exists on the switch. Verify the VMPS configuration by

entering the show vmps privileged EXEC command.