Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Release Notes Cisco IOS Release 12.2(52)SE and later

6
Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Release Notes, Cisco IOS Release 12.2(52)SE
515765-003
Limitations and Restrictions
Limitations and Restrictions
You should review this section before you begin working with the switch. These are known limitations
that will not be fixed, and there is not always a workaround. Some features might not work as
documented, and some features could be affected by recent changes to the switch hardware or software.
This section contains these limitations:
• “Cisco IOS Limitations” section on page 6
• “Device Manager Limitations and Restrictions” section on page 10
• “Hardware Limitations and Restrictions” section on page 11
Cisco IOS Limitations
These limitations apply to CGESM switch:
• “Configuration” section on page 7
• “Ethernet” section on page 8
• “HSRP” section on page 8
• “IP” section on page 8
• “IP Telephony” section on page 8
• “Multicasting” section on page 8
• “QoS” section on page 9
• “SPAN and RSPAN” section on page 9
• “Trunking” section on page 10
Support for auto rendezvous point (auto-RP) for multicast 12.2(37)SE
Web authentication 12.2(35)SE
Support for DSCP transparency 12.2(25)SE1
Support for VLAN-based QoS and hierarchical policy maps on SVIs 12.2(25)SE1
Device manager 12.2(25)SE1
Support for SSL version 3.0 for secure HTTP communication
(cryptographic images only)
12.2(25)SE1
802.1x accounting and MIBs (IEEE8021-PAE-MIB and
CISCO-PAE-MIB)
12.2(25)SE1
Flex Links 12.2(25)SE1
HTTP software upgrade (device manager only) 12.2(25)SE1
SFP module diagnostic-management interface 12.2(25)SE1
Smartports macros 12.2(25)SE1
Table 2 CGESM Switch Features and the Minimum Cisco IOS Release Required (continued)
Feature
Minimum Cisco IOS
Release Required