Cisco Gigabit Ethernet Switch Module for HP p-Class BladeSystem Release Notes, Cisco IOS Release 12.2(25)SED

2
November 2005
These release notes include important information about this Cisco IOS release for the Cisco Gigabit Ethernet
Switch Module (CGESM) for the HP p-Class BladeSystem. This document includes any limitations, restrictions,
and caveats that apply to this release.
NOTE: The documentation for the CGESM switch refers to Cisco IOS Release 12.2(25)SE. The correct Cisco
IOS release is Cisco IOS Release 12.2(25)SED. For a complete list of these documents, see the Documentation
notes section.
To verify that these release notes are correct for your switch, use the show version user EXEC command (see
the Finding the software version and feature set
section).
You can download the switch software from this URL:
http://www.hp.com/support
Contents
This information is in the release notes:
• System requirements
• Upgrading the switch software
• Installation notes
• Major features
• Minimum Cisco IOS release for major features
• Limitations and restrictions
• Device manager notes
• VLAN interfaces and MAC addresses
• Open caveats
• Resolved caveats
• Related documentation
• Obtaining technical support
System requirements
The system requirements are described in the Device manager system requirements section.
Device manager system requirements
These sections describes the hardware and software requirements for using the device manager:
• Hardware requirements
• Software requirements
Hardware requirements
The following table lists the minimum hardware requirements for running the device manager.
Table 1 Minimum hardware requirements
Processor speed DRAM Number of colors Resolution Font size
Intel Pentium II
1
64 MB
2
256 1024 x 768 Small
1. We recommend Intel Pentium 4.
2. We recommend 256 MB DRAM.