Cisco Gigabit Ethernet Switch Module for HP p-Class BladeSystem Release Notes, Cisco IOS Release 12.2(25)SED

6
Minimum Cisco IOS release for major features
The following table lists the minimum software release required to support the major features on this switch.
Table 3 CGESM switch features and the minimum Cisco IOS release required
Feature Minimum Cisco IOS release required
Support for DSCP transparency 12.2(25)SE1
Support for VLAN-based QoS and hierarchical policy maps on SVIs 12.2(25)SE1
Device manager 12.2(25)SE1
Support for SSL version 3.0 for secure HTTP communication
(cryptographic images only)
12.2(25)SE1
802.1x accounting and MIBs (IEEE8021-PAE-MIB and
CISCO-PAE-MIB)
12.2(25)SE1
Flex Links 12.2(25)SE1
HTTP software upgrade (device manager only) 12.2(25)SE1
SFP module diagnostic-management interface 12.2(25)SE1
Smartports macros 12.2(25)SE1
Trunk failover (Layer 2 trunk failover or link state tracking) 12.2(25)SE2
Configurable IGMP leave timer 12.2(25)SED
Limitations and restrictions
You should review this section before you begin working with the switch. These are known limitations that will not
be fixed, and there is not always a workaround. Some features might not work as documented, and some
features could be affected by recent changes to the switch hardware or software.
This section contains these limitations:
• Cisco IOS limitations
• Device manager limitations and restrictions
Cisco IOS limitations
These limitations apply to CGESM switch:
• Configuration
• Ethernet
• HSRP
• IP
• IP telephony
• Multicasting
• QoS
• SPAN and RSPAN
• Trunking
• VLAN