Cisco Gigabit Ethernet Switch Module for HP p-Class BladeSystem Software Configuration Guide

Index
IN-33
Cisco Gigabit Ethernet Switch Module for HP p-Class BladeSystem Software Configuration Guide
380261-003
uploading
configuration files
preparing
B-11, B-14, B-17
reasons for B-9
using FTP B-15
using RCP B-19
using TFTP B-12
image files
preparing
B-23, B-26, B-30
reasons for B-21
using FTP B-28
using RCP B-33
using TFTP B-25
user EXEC mode 2-2
username-based authentication 5-6
V
version-dependent transparent mode 10-4
vlan.dat file 9-4
VLAN 1, disabling on a trunk port 9-19
VLAN 1 minimization 9-19
VLAN ACLs
See VLAN maps
vlan-assignment response, VMPS
9-25
VLAN configuration
at bootup
9-7
saving 9-7
VLAN configuration mode 2-2, 9-6
VLAN database
and startup configuration file
9-7
and VTP 10-1
VLAN configuration saved in 9-7
VLANs saved in 9-4
vlan database command 9-6
VLAN filtering and SPAN 22-6
vlan global configuration command 9-6
VLAN ID, discovering 4-26
VLAN load balancing on flex links 15-2
configuration guidelines 15-5
VLAN management domain 10-2
VLAN Management Policy Server
See VMPS
VLAN map entries, order of
26-23
VLAN maps
applying
26-26
common uses for 26-27
configuration guidelines 26-23
configuring 26-22
creating 26-24
defined 26-2, 26-3
denying access to a server example 26-28
denying and permitting packets 26-24
displaying 26-29
examples of ACLs and VLAN maps 26-24
removing 26-26
support for 1-7
wiring closet configuration example 26-27
VLAN membership
confirming
9-29
modes 9-3
VLAN Query Protocol
See VQP
VLANs
adding
9-8
adding to VLAN database 9-8
aging dynamic addresses 12-9
allowed on trunk 9-19
and spanning-tree instances 9-2, 9-6, 9-12
configuration guidelines, extended-range VLANs 9-12
configuration guidelines, normal-range VLANs 9-5
configuration options 9-6
configuring 9-1
configuring IDs 1006 to 4094 9-12
creating in config-vlan mode 9-8
creating in VLAN configuration mode 9-9
default configuration 9-7