Cisco Gigabit Ethernet Switch Module for HP p-Class BladeSystem System Message Guide

CHAPTER

2-1

Cisco Gigabit Ethernet Switch Module for the HP p-Class BladeSystem System Message Guide

380260-004

Message and Recovery Procedures

This chapter describes the Cisco Gigabit Ethernet Switch Module (CGESM) system messages in

alphabetical order by facility. Within each facility, the messages are listed by severity levels 0 to 7: 0 is

the highest severity level, and 7 is the lowest severity level. Each message is followed by an explanation

and a recommended action.

Note The messages listed in this chapter do not include the hostname or the date/time-stamp designation that

appears only if the software is configured for system log messaging.

• ACLMGR Messages, page 2-2

• BSPATCH Messages, page 2-6

• CGESM Messages, page 2-7

• CMP Messages, page 2-8

• DHCP_SNOOPING Messages, page 2-9

• DOT1X Messages, page 2-12

• DOT1X_SWITCH Messages, page 2-13

• DTP Messages, page 2-14

• DWL Messages, page 2-16

• EC Messages, page 2-16

• ETHCNTR Messages, page 2-20

• EXPRESS_SETUP Messages, page 2-21

• GBIC_SECURITY Messages, page 2-22

• GBIC_SECURITY_CRYPT Messages, page 2-23

• GBIC_SECURITY_UNIQUE Messages, page 2-24

• HARDWARE Messages, page 2-25

• HLFM Messages, page 2-27

• IGMP_QUERIER Messages, page 2-28

• MAC_LIMIT Messages, page 2-29

• MAC_MOVE Messages, page 2-30

• PHY Messages, page 2-31