Cisco Gigabit Ethernet Switch Module for HP p-Class BladeSystem System Message Guide

2-3
Cisco Gigabit Ethernet Switch Module for the HP p-Class BladeSystem System Message Guide
380260-004
Chapter 2 Message and Recovery Procedures
ACLMGR Messages
Error Message ACLMGR-2-NOVLB: Cannot create memory block for VLAN [dec].
Explanation This message means that the ACL manager could not save per-VLAN information
needed for its correct operation. Some per-interface features, such as access groups or VLAN maps,
will not be configured correctly. [dec] is the VLAN ID.
Recommended Action Use a less complicated configuration that requires less memory.
Error Message ACLMGR-2-NOVMR: Cannot create VMR data structures for access list
[chars].
Explanation This message means that the ACL manager could not allocate the value-mask result
(VMR) data structures needed to describe an ACL in a form that can be loaded into hardware. This
error is most likely caused by lack of available memory. [chars] is the access-list name.
Recommended Action Use a less complicated configuration that requires less memory.
Error Message ACLMGR-3-ACLTCAMFULL: Acl Tcam Full. Drop packets on Output Acl label
[dec] on [chars] [chars].
Explanation This message means that the platform-specific ACL TCAM cannot support the number
of configured ACLs. [dec] is the label number, and [chars] represents the layer. The first [chars] is
Layer 3, and the second [chars] is Layer 2. If only one layer of TCAM is full, only one string is
displayed, and the other string is NULL.
Recommended Action Reduce the number of IP or MAC access lists to be applied to interfaces.
Error Message ACLMGR-3-AUGMENTFAIL: Augmenting of access-map [chars] on [chars]
label [dec] failed.
Explanation This message means that the system ran out of CPU DRAM when trying to merge
internally required elements with the configured access maps. The first [chars] is the access-map
name, the second [chars] is the direction in which the map was applied (input or output), and [dec]
is the label number.
Recommended Action Reduce other system activity to ease memory demands.
Error Message ACLMGR-3-IECPORTLABELERROR: ACL labels are out-of-sync on interface
[chars], label [dec] is not available on asic [dec].
Explanation This message means that an internal software error has occurred. [chars] is the interface
name. The first [dec] is the label associated with the ACL, and the second [dec] is the ASIC number.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact HP technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting HP, see the
“Error Message Traceback Reports” section on page 1-5.