Cisco Gigabit Ethernet Switch Module for HP p-Class BladeSystem System Message Guide

2-5
Cisco Gigabit Ethernet Switch Module for the HP p-Class BladeSystem System Message Guide
380260-004
Chapter 2 Message and Recovery Procedures
ACLMGR Messages
Error Message ACLMGR-3-NOLABEL: Cannot allocate [chars] label for interface [chars].
Explanation This message means that the ACL manager could not allocate a label for the features on
this interface. This means that the hardware cannot be programmed to implement the features, and
packets for this interface will be filtered in software. There is a limit of 256 labels per direction. The
first [chars] is the direction (input or output), and the second [chars] is the interface name.
Recommended Action Use a simpler configuration. Use the same ACLs on multiple interfaces, if
possible.
Error Message ACLMGR-3-OUTTTABLE: Not in truth table: RACL [dec] VLMAP [dec].
Explanation This message means that an unrecoverable software error occurred while trying to
merge the configured output features. [dec] are internal action codes.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact HP technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting HP, see the
“Error Message Traceback Reports” section on page 1-5.
Error Message ACLMGR-3-QOSTTABLE: Not in truth table: ACL [dec] in map, action [dec].
Explanation This message means that a software error occurred while trying to merge a quality of
service (QoS) policy map. The first [dec] is the ACL number, and the second [dec] is the action
corresponding to the specified ACL number.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact HP technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting HP, see the
“Error Message Traceback Reports” section on page 1-5.
Error Message ACLMGR-3-RELOADED: Reloading [chars] label [dec] feature.
Explanation This message means that the ACL manager can now load more of the configured
features on this label into the hardware. One or more features had previously been unloaded because
of lack of space. [chars] is the direction (input or output), and [dec] is the label number.
Recommended Action No action is required.
Error Message ACLMGR-3-UNKNOWNACTION: Unknown VMR access group action [hex].
Explanation This message means that an internal software error has occurred. [hex] is an internal
action code.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact HP technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting HP, see the
“Error Message Traceback Reports” section on page 1-5.