Manualshelf

Cisco Gigabit Ethernet Switch Module for HP p-Class BladeSystem System Message Guide

ManualsBrandsHP ManualsComputer AccessoriesCisco BLp-Class Ethernet Switch
31323334353637383940
2-21
Cisco Gigabit Ethernet Switch Module for the HP p-Class BladeSystem System Message Guide
380260-004
Chapter 2 Message and Recovery Procedures
EXPRESS_SETUP Messages
EXPRESS_SETUP Messages
This section contains messages for the Express Setup feature.
Error Message EXPRESS_SETUP-3-UNABLE_TO_RESET_CONFIG: [chars].
Explanation This message means that the system cannot reset the configuration. [chars] is a text
string that explains why the reset failed. For example,
error renaming config file, error
removing config file
, or error removing private config file.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact HP technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting HP, see the
“Error Message Traceback Reports” section on page 1-5.
Error Message EXPRESS_SETUP-6-CONFIG_IS_RESET: [chars].
Explanation This message means that the configuration is reset. [chars] is a text message that
clarifies the reset event, such as
The configuration is reset and the system will now reboot.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact HP technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting HP, see the
“Error Message Traceback Reports” section on page 1-5.
Error Message EXPRESS_SETUP-6-MODE_ENTERED.
Explanation This message means that the Express Setup mode is active.
Recommended Action No action is required.
Error Message EXPRESS_SETUP-6-MODE_EXITED.
Explanation This message means that the Express Setup mode is no longer active.
Recommended Action No action is required.