Cisco Gigabit Ethernet Switch Module for HP p-Class BladeSystem System Message Guide

2-24
Cisco Gigabit Ethernet Switch Module for the HP p-Class BladeSystem System Message Guide
380260-004
Chapter 2 Message and Recovery Procedures
GBIC_SECURITY_UNIQUE Messages
Error Message GBIC_SECURITY_CRYPT-4-UNRECOGNIZED_VENDOR: GBIC interface [chars]
manufactured by an unrecognized vendor.
Explanation This message means that the SFP module was identified as a Cisco SFP module, but the
system could not match its manufacturer with one of the known list of Cisco SFP module vendors.
[chars] is the interface in which the module is installed.
Recommended Action Check the list of supported SFP modules for this version of the system
software. An upgrade might be required for newer modules.
Error Message GBIC_SECURITY_CRYPT-4-VN_DATA_CRC_ERROR: GBIC interface [chars] has
bad crc.
Explanation This message means that the SFP module was identified as a Cisco SFP module, but it
does not have a valid CRC in the EEPROM data. [chars] is the interface in which the module is
installed.
Recommended Action Check the list of supported SFP modules for this version of the system
software. An upgrade might be required for newer modules. Even if unrecognized, the module might
operate but with limited functionality.
GBIC_SECURITY_UNIQUE Messages
This section contains the Cisco GBIC module and SFP module security messages that identify whether
the module is unique.
Note The switch supports SFP modules and does not support GBIC modules. Although the error message text
refers to GBIC interfaces and modules, the messages from the switch actually refer to the SFP module
interfaces and modules.
Error Message GBIC_SECURITY_UNIQUE-3-DUPLICATE_GBIC: GBIC interface [dec]/[dec] is
a duplicate of GBIC interface [dec]/[dec].
Explanation This message means that the SFP module was identified as a Cisco GBIC or SFP
module, but its vendor ID and serial number match that of another interface on the system. The first
[dec]/[dec] is the interface of the duplicate GBIC or SPF module, and the second [dec]/[dec] is the
interface of the existing module.
Recommended Action Cisco GBIC or SFP modules are assigned unique serial numbers. Verify that
the module was obtained from Cisco or from a supported vendor.