Cisco Gigabit Ethernet Switch Module for HP p-Class BladeSystem System Message Guide

2-26
Cisco Gigabit Ethernet Switch Module for the HP p-Class BladeSystem System Message Guide
380260-004
Chapter 2 Message and Recovery Procedures
HARDWARE Messages
Error Message HARDWARE-2-THERMAL_WARNING: Temperature has reached warning threshold.
Explanation This message means that the temperature sensor valve inside the switch reached the
warning threshold. The switch can function normally until the temperature reaches the critical
threshold.
Recommended Action The external temperature is high. Reduce the temperature in the room.
Error Message HARDWARE-3-ASICNUM_ERROR: Port-ASIC number [dec] is invalid.
Explanation This message means that the port ASIC number used is invalid. Each port ASIC is
identified by an ID. [dec] is the ASIC number.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact HP technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting HP, see the
“Error Message Traceback Reports” section on page 1-5.
Error Message HARDWARE-3-INDEX_ERROR: Index value [dec] is invalid.
Explanation This message means that the index into the hardware table is out-of-range. [dec] is the
index value.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact HP technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting HP, see the
“Error Message Traceback Reports” section on page 1-5.
Error Message HARDWARE-3-INTRNUM_ERROR: Port-ASIC Interrupt number [dec] is invalid.
Explanation This message means that the interrupt ID used in a port ASIC is invalid. [dec] is the
interrupt number.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact HP technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting HP, see the
“Error Message Traceback Reports” section on page 1-5.
Error Message HARDWARE-3-PORTNUM_ERROR: port number [dec] is invalid.
Explanation This message means that the port number used is invalid (out of range). Each interface
in a given port ASIC is identified by an index value. [dec] is the port number.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact HP technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting HP, see the
“Error Message Traceback Reports” section on page 1-5.