Cisco Gigabit Ethernet Switch Module for HP p-Class BladeSystem System Message Guide

2-27

Cisco Gigabit Ethernet Switch Module for the HP p-Class BladeSystem System Message Guide

380260-004

Chapter 2 Message and Recovery Procedures

HLFM Messages

Error Message HARDWARE-3-STATS_ERROR: Statistics ID [dec] is invalid.

Explanation This message means that the statistics ID used is out of range. The statistics supported

by the port ASIC are identified by an ID. [dec] is the statistics ID.

Recommended Action Copy the message exactly as it appears on the console or in the system log.

Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to

look for similar reported problems. If you still require assistance, contact HP technical support and

provide the representative with the gathered information. For more information about the online

tools and about contacting HP, see the

“Error Message Traceback Reports” section on page 1-5.

Error Message HARDWARE-5-FAN_OK: Fan works fine.

Explanation This message means that the fan is now working properly.

Recommended Action No action is required.

Error Message HARDWARE-5-THERMAL_NORMAL: Temperature is within the acceptable limit.

Explanation This message means that the temperature sensor valve inside the switch is within the

normal limit.

Recommended Action No action is required.

HLFM Messages

This section contains messages from the local forwarding manager.

Error Message HLFM-3-MACFREE_ERROR: MAC address [enet], vlan [dec] is still

referenced; cannot free.