Cisco Gigabit Ethernet Switch Module for HP p-Class BladeSystem System Message Guide

2-34

Cisco Gigabit Ethernet Switch Module for the HP p-Class BladeSystem System Message Guide

380260-004

Chapter 2 Message and Recovery Procedures

PLATFORM_VLAN Messages

This section contains platform VLAN messages.

Error Message PLATFORM_VLAN-3-LOCK_FAIL: Failed to lock vlan-id [dec], associated

mapped vlan id value [dec].

Explanation This message means that the VLAN lock operation failed. This can occur if the VLAN

is already active in the system or if the VLAN ID is not active. The first [dec] is the VLAN ID, and

the second [dec] is the mapped-vlan-id (MVID).

Recommended Action Copy the message exactly as it appears on the console or in the system log.

Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to

look for similar reported problems. If you still require assistance, contact HP technical support and

provide the representative with the gathered information. For more information about the online

tools and about contacting HP, see the

“Error Message Traceback Reports” section on page 1-5.

Error Message PLATFORM_VLAN-3-MVID_ERROR: Mapped Vlan ID value [dec] associated with

vlan-id [dec] is invalid.

Explanation This message means that an active VLAN is not correctly associated with a MVID. The

first [dec] is the VLAN ID, and the second [dec] is the MVID.

Recommended Action Copy the message exactly as it appears on the console or in the system log.

Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to

look for similar reported problems. If you still require assistance, contact HP technical support and

provide the representative with the gathered information. For more information about the online

tools and about contacting HP, see the

“Error Message Traceback Reports” section on page 1-5.

Error Message PLATFORM_VLAN-3-UNLOCK_FAIL: Failed to unlock vlan-id [dec],

associated mapped vlan id value [dec].

Explanation This message means that the switch did not unlock a VLAN ID. The most likely cause

is that the VLAN is already unlocked. The first [dec] is the VLAN ID, and the second [dec] is the

MVID.

Recommended Action Copy the message exactly as it appears on the console or in the system log.

Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to

look for similar reported problems. If you still require assistance, contact HP technical support and

provide the representative with the gathered information. For more information about the online

tools and about contacting HP, see the

“Error Message Traceback Reports” section on page 1-5.