Cisco Gigabit Ethernet Switch Module for HP p-Class BladeSystem System Message Guide

2-35
Cisco Gigabit Ethernet Switch Module for the HP p-Class BladeSystem System Message Guide
380260-004
Chapter 2 Message and Recovery Procedures
PM Messages
PM Messages
This section contains the port manager messages. The port manager is a state machine that controls all
the logical and physical interfaces. All features, such as VLANs, UDLD, and so forth, work with the port
manager to provide switch functions.
Error Message PM-2-LOW_SP_MEM: Switch process available memory is less than [dec]
bytes.
Explanation This message means that the available memory for the switch processor is low. This can
occur when too many Layer 2 VLANs are configured. [dec] is the available memory.
Recommended Action Remove VLANs from the system to reduce memory usage.
Error Message PM-2-NOMEM: Not enough memory available for [chars].
Explanation This message means that the port manager subsystem could not obtain the memory it
needed to initialize the specified operation. [chars] is the port manager operation.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact HP technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting HP, see the
“Error Message Traceback Reports” section on page 1-5.
Error Message PM-2-VLAN_ADD: Failed to add VLAN [dec] - [chars].
Explanation This message means that the software did not add the VLAN to the VLAN Trunking
Protocol (VTP) database. [dec] is the VLAN ID, and [chars] specifies the reason the software did
not add the VLAN.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact HP technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting HP, see the
“Error Message Traceback Reports” section on page 1-5.
Error Message PM-3-INTERNALERROR: Port Manager Internal Software Error ([chars]:
[chars]: [dec]: [chars]).
Explanation This message means that an internal software error occurred in the port manager. The
parameters identify the problem for technical support. The first [chars] is the error message, and the
second [chars] is the filename. [dec] is the line number, and the last [chars] is the function name.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact HP technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting HP, see the
“Error Message Traceback Reports” section on page 1-5.