Cisco Gigabit Ethernet Switch Module for HP p-Class BladeSystem System Message Guide

Cisco Gigabit Ethernet Switch Module for the HP p-Class BladeSystem System Message Guide

380260-004

Preface

Audience

This guide is for the networking professional managing the Cisco Gigabit Ethernet Switch Module

(CGESM) for FSC, hereafter referred to as the switch. Before using this guide, you should have

experience working with the Cisco IOS software and the switch software features.

Purpose

This guide describes the Cisco Gigabit Ethernet Switch Module (CGESM)-specific system messages

that you might encounter. For a complete list of Cisco IOS system error messages, see the Cisco IOS

Software System Error Messages, Cisco IOS Release 12.2.

This guide does not describe how to install your switch or how to configure software features on your

switch. It also does not provide detailed information about commands that have been created or changed

for use by the switch. For hardware installation information, see the hardware installation guide that

shipped with your switch. For software information, see the software configuration guide and the

command reference for this release.

For documentation updates, see the release notes for this release.

Conventions

This publication uses these conventions to convey instructions and information:

Command descriptions use these conventions:

• Commands and keywords are in boldface text.

• Arguments for which you supply values are in italic.

• Square brackets ([ ]) mean optional elements.

• Braces ({ }) group required choices, and vertical bars ( | ) separate the alternative elements.

• Braces and vertical bars within square brackets ([{ | }]) mean a required choice within an optional

element.