Cisco Gigabit Ethernet Switch Module for HP p-Class BladeSystem System Message Guide

2-39
Cisco Gigabit Ethernet Switch Module for the HP p-Class BladeSystem System Message Guide
380260-004
Chapter 2 Message and Recovery Procedures
PM Messages
Error Message PM-4-ERR_RECOVER: Attempting to recover from [chars] err-disable state
on [chars].
Explanation This message means that the port manager is trying to restart an error-disabled interface.
The first [chars] is the error, and the second [chars] is the interface.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact HP technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting HP, see the
“Error Message Traceback Reports” section on page 1-5.
Error Message PM-4-ERR_RECOVER_VP: Attempting to recover from [chars] err-disable
state on [chars], vlan [dec].
Explanation This message means that the port manager is trying to restart an error-disabled virtual
port. The first [chars] is the error, the second [chars] is the virtual port, and [dec] is the VLAN ID.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error using the Output Interpreter. Use the Bug Toolkit to look
for similar reported problems. If you still require assistance, open a case with the TAC, or contact
your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
“Error
Message Traceback Reports” section on page 1-5
Error Message PM-4-EXT_VLAN_INUSE: VLAN [dec] currently in use by [chars].
Explanation This message means that the port manager did not allocate the VLAN for external use
because the VLAN is being used by another feature. [dec] is the VLAN that is being used, and
[chars] is the feature that is using it.
Recommended Action Reconfigure the feature to use another internal VLAN or to request another
available VLAN.
Error Message PM-4-EXT_VLAN_NOTAVAIL: VLAN [dec] not available in Port Manager.
Explanation This message means that the port manager did not allocate the requested VLAN. The
VLAN is probably being used as an internal VLAN by other features. [dec] is the requested VLAN.
Recommended Action Configure a different VLAN on the device.