Cisco Gigabit Ethernet Switch Module for HP p-Class BladeSystem System Message Guide

1-2
Cisco Gigabit Ethernet Switch Module for the HP p-Class BladeSystem System Message Guide
380260-004
Chapter 1 System Message Overview
How to Read System Messages
CGESM Cisco Gigabit Ethernet Switch
Module (CGESM)
“CGESM Messages” section on
page 2-7
CMP Cluster Membership Protocol “CMP Messages” section on
page 2-8
DHCP_SNOOPING DHCP snooping “DHCP_SNOOPING Messages”
section on page 2-9
DOT1X IEEE 802.1x “DOT1X Messages” section on
page 2-12
DOT1X_SWITCH IEEE 802.1x for switches “DOT1X_SWITCH Messages”
section on page 2-13
DTP Dynamic Trunking Protocol “DTP Messages” section on
page 2-14
DWL Down-when-looped “DWL Messages” section on
page 2-16
EC EtherChannel “EC Messages” section on
page 2-16
ETHCNTR Ethernet Controller “ETHCNTR Messages” section
on page 2-20
EXPRESS_SETUP Express Setup “EXPRESS_SETUP Messages”
section on page 2-21
GBIC_SECURITY GBIC module and small
form-factor pluggable (SFP)
module security
“GBIC_SECURITY Messages”
section on page 2-22
GBIC_SECURITY_CRYPT GBIC and SFP module security “GBIC_SECURITY_CRYPT
Messages” section on page 2-23
GBIC_SECURITY_UNIQUE GBIC and SFP module security “GBIC_SECURITY_UNIQUE
Messages” section on page 2-24
HARDWARE Hardware “HARDWARE Messages”
section on page 2-25
HLFM Local forwarding manager “HLFM Messages” section on
page 2-27
IGMP_QUERIER Internet Group Management
Protocol (IGMP) querier
“IGMP_QUERIER Messages”
section on page 2-28
MAC_LIMIT MAC address table entries “MAC_LIMIT Messages”
section on page 2-29
MAC_MOVE Host activity “MAC_MOVE Messages”
section on page 2-30
PAGP_DUAL_ACTIVE Port Aggregation Protocol
(PAgP) dual-active detection
“PAGP_DUAL_ACTIVE
Messages” section on page 2-30
PHY PHY “PHY Messages” section on
page 2-31
Table 1-1 Facility Codes (continued)
Facility Code Description Location