Cisco Gigabit Ethernet Switch Module for HP p-Class BladeSystem System Message Guide

2-68
Cisco Gigabit Ethernet Switch Module for the HP p-Class BladeSystem System Message Guide
380260-004
Chapter 2 Message and Recovery Procedures
TCAMMGR Messages
Error Message SW_VLAN-6-VTP_MODE_CHANGE: VLAN manager changing device mode from
[chars] to [chars].
Explanation This message means that an automatic VTP-mode device-change occurred upon receipt
of a VLAN configuration database message containing more than a set number of VLANs. The first
[chars] is the previous mode, and the second [chars] is the current mode.
Recommended Action No action is required.
TCAMMGR Messages
This section contains the ternary content-addressable memory manager (TCAMMGR) messages.
Error Message TCAMMGR-3-GROW_ERROR: cam region [dec] can not grow.
Explanation This message means that the specified CAM region is configured as a static region with
a fixed number of entries, and a caller requested to add more CAM entries. [dec] is the CAM region.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact HP technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting HP, see the
“Error Message Traceback Reports” section on page 1-5.
Error Message TCAMMGR-3-HANDLE_ERROR: cam handle [hex] is invalid.
Explanation This message means that the CAM handle used by the caller is not valid. [hex] is the
handle value.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact HP technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting HP, see the
“Error Message Traceback Reports” section on page 1-5.
Error Message TCAMMGR-3-INDEX_ERROR: cam value/mask index [dec] is invalid.
Explanation This message means that the CAM index used by the caller is not valid. [dec] is the
index value.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact HP technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting HP, see the
“Error Message Traceback Reports” section on page 1-5.