Cisco Gigabit Ethernet Switch Module for HP p-Class BladeSystem System Message Guide

2-69
Cisco Gigabit Ethernet Switch Module for the HP p-Class BladeSystem System Message Guide
380260-004
Chapter 2 Message and Recovery Procedures
UDLD Messages
Error Message TCAMMGR-3-MOVE_ERROR: cam entry move from index [int] to index [int]
failed.
Explanation This message means that moving a CAM entry from one index to another failed. [int] is
the index value.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact HP technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting HP, see the
“Error Message Traceback Reports” section on page 1-5.
Error Message TCAMMGR-3-REGION_ERROR: cam region [dec] is invalid.
Explanation This message means that the CAM region is not valid. [dec] is the region.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact HP technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting HP, see the
“Error Message Traceback Reports” section on page 1-5.
Error Message TCAMMGR-3-REGMASK_ERROR: invalid cam region [dec] mask [dec] pair.
Explanation This message means that a caller attempted to install an entry with an invalid mask for
the region. Only a predetermined set of masks is allowed in a region. The first [dec] is the region,
and the second [dec] is the mask.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact HP technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting HP, see the
“Error Message Traceback Reports” section on page 1-5.
UDLD Messages
This section contains UniDirectional Link Detection (UDLD) messages.
Error Message UDLD-0-STOPPED:UDLD process stopped:[chars].
Explanation This message means that the UDLD process stopped because it cannot read the unique
system identifier that is being used by UDLD. The system identifier is used to identify the device
that is sending the UDLD packets. [chars] is the UDLD process name.
Recommended Action Reload the switch by using the reload privileged EXEC command. If the
problem persists, copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact HP technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting HP, see the
“Error Message Traceback Reports” section on page 1-5.