Cisco Gigabit Ethernet Switch Module for HP p-Class BladeSystem System Message Guide

1-3
Cisco Gigabit Ethernet Switch Module for the HP p-Class BladeSystem System Message Guide
380260-004
Chapter 1 System Message Overview
How to Read System Messages
PLATFORM Low-level platform-specific “PLATFORM Messages”
section on page 2-32
PLATFORM_PM Platform port manager “PLATFORM_PM Messages”
section on page 2-33
PLATFORM_VLAN Platform VLAN “PLATFORM_VLAN
Messages” section on page 2-34
PM Port manager “PM Messages” section on
page 2-35
PORT_SECURITY Port security “PORT_SECURITY Messages”
section on page 2-43
QOSMGR QoS manager “QOSMGR Messages” section
on page 2-44
RMON Remote Network Monitoring
(RMON)
“RMON Messages” section on
page 2-49
SPAN Switched Port Analyzer “SPAN Messages” section on
page 2-49
SPANTREE Spanning Tree “SPANTREE Messages” section
on page 2-50
SPANTREE_FAST Spanning-tree fast convergence “SPANTREE_FAST Messages”
section on page 2-58
SPANTREE_VLAN_SW Spanning-tree VLAN switch “SPANTREE_VLAN_SW
Messages” section on page 2-58
STORM_CONTROL Storm control “STORM_CONTROL
Messages” section on page 2-58
SUPERVISOR Supervisor ASIC “SUPERVISOR Messages”
section on page 2-59
SUPQ Supervisor queue “SUPQ Messages” section on
page 2-59
SW_MACAUTH MAC address authentication “SW_MACAUTH Messages”
section on page 2-61
SW_VLAN VLAN manager “SW_VLAN Messages” section
on page 2-62
TCAMMGR Ternary content addressable
memory manager
“TCAMMGR Messages” section
on page 2-68
UDLD UniDirectional Link Detection “UDLD Messages” section on
page 2-69
UFAST_MCAST_SW UplinkFast (UFAST) packet
transmission
“UFAST_MCAST_SW
Messages” section on page 2-71
VQPCLIENT VLAN Query Protocol client “VQPCLIENT Messages”
section on page 2-72
WCCP Web Cache Communication
Protocol (WCCP)
“WCCP Messages” section on
page 2-73
Table 1-1 Facility Codes (continued)
Facility Code Description Location