Cisco Gigabit Ethernet Switch Module for HPBladeSystem p-Class Release Notes, CiscoIOSRelease12.2(35)SE and later

34
Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Release Notes, Cisco IOS Release 12.2(35)SE and later
459515-002
Documentation Updates
Error Message PHY-4-UNSUPPORTED_SFP_CARRIER: Unsupported SFP carrier module found in
[chars]
Explanation The switch has identified the small form-factor pluggable (SFP) module as an
unsupported non-Cisco SFP module. [chars] is the interface.
Recommended Action Remove the unsupported SFP module, and use a supported module.
Error Message PORT_SECURITY-6-ADDR_REMOVED: Address [dec]:[enet] exists on port
[chars]. It has been removed from port [chars].
Explanation A routed port is reconfigured as a switch port. The address in the previous switch
configuration conflicts with the running configuration and has been deleted. [dec]:[enet] is the MAC
address of the port. [chars] is the reconfigured port.
Recommended Action No action is required.
Error Message WCCP-5-SERVICEFOUND: Service [chars] acquired on WCCP Client
[IP_address]
Explanation Web Cache Communication Protocol (WCCP) has found a service on the specified
WCCP client. [chars] is the name of the service, and [IP_address] is the client IP address.
Recommended Action No action is required.
Error Message WCCP-1-SERVICELOST: Service [chars] lost on WCCP Client [IP_address]
Explanation WCCP has lost the service associated with the specified WCCP client. [chars] is the
name of the service, and [IP_address] is the client IP address.
Recommended Action Verify the operational state of the WCCP client.
These system messages were updated in the system message guide:
Error Message EC-5-CANNOT_BUNDLE_LACP: [chars] is not compatible with aggregators in
channel [dec] and cannot attach to them ([chars]).
Explanation The port has different port attributes than the port channel or ports within the port
channel. [chars] is the incompatible port. [chars] is the short interface name, such as Gi1/0/1 on a
Catalyst 3750 switch, [dec] is the channel group number, and the last [chars] is the reason.
Recommended Action For the port to join the bundle, change the port attributes so that they match the
port.
Error Message EC-5-DONTBNDL: [chars] suspended: incompatible remote port with
[chars]
Recommended Action The configuration of the remote port differs from the configuration of other
remote ports in the bundle. A port can only join the bundle when its global configuration and the
configuration of the remote port are the same as other ports in the bundle. The first [chars] is the
suspended local interface, and the second [chars] is the local interface that is already bundled.