Release Notes for Cisco Catalyst Blade Switch 3120 for HP, Cisco IOS Release 12.2(53)SE and Later

3
Release Notes for Cisco Catalyst Blade Switch 3120 for HP, Cisco IOS Release 12.2(53)SE and Later
OL-21144-02
System Requirements
Caution The Cisco Catalyst Blade Switch 3120 for HP switch modules do not support switch stacks with other
types of blades switches as members. Combining the Cisco Catalyst Blade Switch 3120 for HP with
other types of blade switches in a switch stack might cause the switch to work improperly or to fail.
Device Manager System Requirements
These sections describe the hardware and software requirements for using the device manager:
• Hardware Requirements, page 3
• Software Requirements, page 4
Hardware Requirements
Table 2 lists the minimum hardware requirements for running the device manager.
Cisco X2 transceiver modules X2-10GB-SR
X2-10GB-LRM
X2-10GB-CX4
X2-10GB-LR
X2-10GB-LX4
12.2(40)EX3
12.2(46)SE
SFP modules
2
GLC-T
GLC-SX-MM
GLC-LH-SM
12.2(40)EX3
Supports OneX
(CVR-X2-SFP10G) and these
SFP+ modules
SFP-10G-SR
SFP-10G-LR
SFP-10G-LRM
Only version 02 or later CX1
3
cables are supported:
SFP-H10GB-CU1M
SFP-H10GB-CU3M
SFP-H10GB-CU5M
Cisco IOS Release 12.2(53)SE
1. X2 module supported only on the CBS3120X-S model
2. SFP = small form-factor pluggable
3. The CX1 cables are used with the OneX converters.
Table 1 Cisco Catalyst Blade Switch 3120 for HP Supported Hardware (continued)
Switch Hardware Description
Supported by Minimum Cisco IOS
Release
Table 2 Minimum Hardware Requirements
Processor Speed DRAM Number of Colors Resolution Font Size
233 MHz minimum
1
1. We recommend 1 GHz.
512 MB
2
2. We recommend 1-GB DRAM.
256 1024 x 768 Small