Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide, Rel. 12.2(25)SEF1

Contents
x
Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide
OL-8915-01
Connecting Interfaces 8-5
Management-Only Interface 8-5
Using Interface Configuration Mode 8-6
Procedures for Configuring Interfaces 8-6
Configuring a Range of Interfaces 8-7
Configuring and Using Interface Range Macros 8-8
Configuring Ethernet Interfaces 8-10
Default Ethernet Interface Configuration 8-10
Configuring Interface Speed and Duplex Mode 8-11
Speed and Duplex Configuration Guidelines 8-11
Setting the Type of a Dual-Purpose Uplink Port 8-12
Setting the Interface Speed and Duplex Parameters 8-14
Configuring IEEE 802.3x Flow Control 8-15
Configuring Auto-MDIX on an Interface 8-16
Adding a Description for an Interface 8-17
Configuring the System MTU 8-18
Monitoring and Maintaining the Interfaces 8-19
Monitoring Interface Status 8-19
Clearing and Resetting Interfaces and Counters 8-20
Shutting Down and Restarting the Interface 8-20
CHAPTER 9 Configuring Smartports Macros 9-1
Understanding Smartports Macros 9-1
Configuring Smartports Macros 9-2
Default Smartports Macro Configuration 9-2
Smartports Macro Configuration Guidelines 9-3
Creating Smartports Macros 9-4
Applying Smartports Macros 9-5
Applying Cisco-Default Smartports Macros 9-6
Displaying Smartports Macros 9-8
CHAPTER 10 Configuring VLANs 10-1
Understanding VLANs 10-1
Supported VLANs 10-2
VLAN Port Membership Modes 10-3
Configuring Normal-Range VLANs 10-4
Token Ring VLANs 10-5
Normal-Range VLAN Configuration Guidelines 10-5