Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide, Rel. 12.2(25)SEF1

Contents

Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide

OL-8915-01

VLAN Configuration Mode Options 10-6

VLAN Configuration in config-vlan Mode 10-6

VLAN Configuration in VLAN Database Configuration Mode 10-6

Saving VLAN Configuration 10-6

Default Ethernet VLAN Configuration 10-7

Creating or Modifying an Ethernet VLAN 10-8

Deleting a VLAN 10-9

Assigning Static-Access Ports to a VLAN 10-10

Configuring Extended-Range VLANs 10-11

Default VLAN Configuration 10-11

Extended-Range VLAN Configuration Guidelines 10-12

Creating an Extended-Range VLAN 10-12

Displaying VLANs 10-13

Configuring VLAN Trunks 10-14

Trunking Overview 10-14

Encapsulation Types 10-16

IEEE 802.1Q Configuration Considerations 10-16

Default Layer 2 Ethernet Interface VLAN Configuration 10-17

Configuring an Ethernet Interface as a Trunk Port 10-17

Interaction with Other Features 10-17

Configuring a Trunk Port 10-18

Defining the Allowed VLANs on a Trunk 10-19

Changing the Pruning-Eligible List 10-20

Configuring the Native VLAN for Untagged Traffic 10-21

Configuring Trunk Ports for Load Sharing 10-21

Load Sharing Using STP Port Priorities 10-22

Load Sharing Using STP Path Cost 10-23

Configuring VMPS 10-25

Understanding VMPS 10-25

Dynamic-Access Port VLAN Membership 10-26

Default VMPS Client Configuration 10-26

VMPS Configuration Guidelines 10-26

Configuring the VMPS Client 10-27

Entering the IP Address of the VMPS 10-27

Configuring Dynamic-Access Ports on VMPS Clients 10-27

Reconfirming VLAN Memberships 10-28

Changing the Reconfirmation Interval 10-28

Changing the Retry Count 10-29

Monitoring the VMPS 10-29