Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide, Rel. 12.2(25)SEF1

Contents
xxii
Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide
OL-8915-01
Enabling Auto-QoS for VoIP 27-26
Auto-QoS Configuration Example 27-27
Displaying Auto-QoS Information 27-29
Configuring Standard QoS 27-29
Default Standard QoS Configuration 27-30
Default Ingress Queue Configuration 27-30
Default Egress Queue Configuration 27-31
Default Mapping Table Configuration 27-32
Standard QoS Configuration Guidelines 27-32
QoS ACL Guidelines 27-32
Applying QoS on Interfaces 27-32
Policing Guidelines 27-33
General QoS Guidelines 27-33
Enabling QoS Globally 27-34
Enabling VLAN-Based QoS on Physical Ports 27-34
Configuring Classification Using Port Trust States 27-35
Configuring the Trust State on Ports within the QoS Domain 27-35
Configuring the CoS Value for an Interface 27-37
Configuring a Trusted Boundary to Ensure Port Security 27-37
Enabling DSCP Transparency Mode 27-39
Configuring the DSCP Trust State on a Port Bordering Another QoS Domain 27-39
Configuring a QoS Policy 27-41
Classifying Traffic by Using ACLs 27-42
Classifying Traffic by Using Class Maps 27-45
Classifying, Policing, and Marking Traffic on Physical Ports by Using Policy Maps 27-47
Classifying, Policing, and Marking Traffic on SVIs by Using Hierarchical Policy Maps 27-51
Classifying, Policing, and Marking Traffic by Using Aggregate Policers 27-57
Configuring DSCP Maps 27-59
Configuring the CoS-to-DSCP Map 27-59
Configuring the IP-Precedence-to-DSCP Map 27-60
Configuring the Policed-DSCP Map 27-61
Configuring the DSCP-to-CoS Map 27-62
Configuring the DSCP-to-DSCP-Mutation Map 27-63
Configuring Ingress Queue Characteristics 27-65
Mapping DSCP or CoS Values to an Ingress Queue and Setting WTD Thresholds 27-66
Allocating Buffer Space Between the Ingress Queues 27-67
Allocating Bandwidth Between the Ingress Queues 27-67
Configuring the Ingress Priority Queue 27-68