Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide, Rel. 12.2(25)SEF1

1-9
Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide
OL-8915-01
Chapter 1 Overview
Default Settings After Initial Switch Configuration
• NTP is enabled. For more information, see Chapter 5, “Administering the Switch.”
• DNS is enabled. For more information, see Chapter 5, “Administering the Switch.”
• TACACS+ is disabled. For more information, see Chapter 6, “Configuring Switch-Based
Authentication.”
• RADIUS is disabled. For more information, see Chapter 6, “Configuring Switch-Based
Authentication.”
• The standard HTTP server and Secure Socket Layer (SSL) HTTPS server are both enabled. For more
information, see Chapter 6, “Configuring Switch-Based Authentication.”
• IEEE 802.1x is disabled. For more information, see Chapter 7, “Configuring IEEE 802.1x
Port-Based Authentication.”
• Port parameters
– Interface speed and duplex mode is autonegotiate. For more information, see Chapter 8,
“Configuring Interface Characteristics.”
– Auto-MDIX is enabled. For more information, see Chapter 8, “Configuring Interface
Characteristics.”
– Flow control is off. For more information, see Chapter 8, “Configuring Interface
Characteristics.”
– PortFast is enabled on the sixteen internal Gigabit Ethernet ports. For more information, see
Chapter 15, “Configuring Optional Spanning-Tree Features.”
• No Smartports macros are defined. For more information, see Chapter 9, “Configuring Smartports
Macros.”
• VLANs
– Default VLAN is VLAN 1. For more information, see Chapter 10, “Configuring VLANs.”
– VLAN trunking setting is dynamic auto (DTP). For more information, see Chapter 10,
“Configuring VLANs.”
– Trunk encapsulation is negotiate. For more information, see Chapter 10, “Configuring
VLANs.”
– VTP mode is server. For more information, see Chapter 11, “Configuring VTP.”
– VTP version is Version 1. For more information, see Chapter 11, “Configuring VTP.”
– Voice VLAN is disabled. For more information, see Chapter 12, “Configuring Voice VLAN.”
• STP, PVST+ is enabled on VLAN 1. For more information, see Chapter 13, “Configuring STP.”
• MSTP is disabled. For more information, see Chapter 14, “Configuring MSTP.”
• Optional spanning-tree features are disabled. For more information, see Chapter 15, “Configuring
Optional Spanning-Tree Features.”
• Flex Links are not configured. For more information, see Chapter 16, “Configuring Flex Links and
the MAC Address-Table Move Update Feature.”
• DHCP snooping is disabled. The DHCP snooping information option is enabled. For more
information, see Chapter 17, “Configuring DHCP Features.”
• IGMP snooping is enabled. No IGMP filters are applied. For more information, see Chapter 18,
“Configuring IGMP Snooping and MVR.”
• IGMP throttling setting is deny. For more information, see Chapter 18, “Configuring IGMP
Snooping and MVR.”