Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide, Rel. 12.2(25)SEF1

Index
IN-27
Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide
OL-8915-01
EtherChannel guard
described
15-7
disabling 15-14
enabling 15-14
extended system ID
effects on root switch
13-14
effects on the secondary root switch 13-16
overview 13-4
unexpected behavior 13-14
features supported 1-4
IEEE 802.1D and bridge ID 13-4
IEEE 802.1D and multicast addresses 13-8
IEEE 802.1t and VLAN identifier 13-4
inferior BPDU 13-3
instances supported 13-9
interface state, blocking to forwarding 15-2
interface states
blocking
13-6
disabled 13-7
forwarding 13-5, 13-6
learning 13-6
listening 13-6
overview 13-4
interoperability and compatibility among modes 13-10
limitations with IEEE 802.1Q trunks 13-10
load sharing
overview
10-21
using path costs 10-23
using port priorities 10-22
loop guard
described
15-9
enabling 15-15
modes supported 13-9
multicast addresses, effect of 13-8
optional features supported 1-5
overview 13-2
path costs 10-23, 10-24
Port Fast
described
15-2
enabling 15-10
port priorities 10-22
preventing root switch selection 15-8
protocols supported 13-9
redundant connectivity 13-8
root guard
described
15-8
enabling 15-15
root port, defined 13-3
root switch
configuring
13-14
effects of extended system ID 13-4, 13-14
election 13-3
unexpected behavior 13-14
shutdown Port Fast-enabled port 15-2
status, displaying 13-22
superior BPDU 13-3
timers, described 13-20
UplinkFast
described
15-3
enabling 15-13
stratum, NTP 5-2
success response, VMPS 10-25
summer time 5-13
SunNet Manager 1-3
switch console port 1-4
Switched Port Analyzer
See SPAN
switched ports
8-2
switchport block multicast command 19-7
switchport block unicast command 19-7
switchport protected command 19-6
switch priority
MSTP
14-21
STP 13-19
switch software features 1-1