Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide, Rel. 12.2(25)SEF1

Index
IN-29
Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide
OL-8915-01
configuring for autoconfiguration 3-6
image files
deleting
B-23
downloading B-22
preparing the server B-21
uploading B-24
limiting access by servers 25-15
TFTP server 1-3
threshold, traffic level 19-2
time
See NTP and system clock
Time Domain Reflector
See TDR
time-range command
26-15
time ranges in ACLs 26-15
time stamps in log messages 24-7
time zones 5-12
Token Ring VLANs
support for
10-5
VTP support 11-4
ToS 1-7
traceroute, Layer 2
and ARP
29-11
and CDP 29-11
broadcast traffic 29-10
described 29-10
IP addresses and subnets 29-11
MAC addresses and VLANs 29-11
multicast traffic 29-11
multiple devices on a port 29-11
unicast traffic 29-10
usage guidelines 29-11
traceroute command 29-13
See also IP traceroute
traffic
blocking flooded
19-7
fragmented 26-4
unfragmented 26-4
traffic policing 1-7
traffic suppression 19-1
transmit hold-count
see STP
transparent mode, VTP
11-3, 11-12
trap-door mechanism 3-2
traps
configuring MAC address notification
5-22
configuring managers 25-11
defined 25-3
enabling 5-22, 25-11
notification types 25-11
overview 25-1, 25-4
troubleshooting
connectivity problems
29-9, 29-10, 29-12
detecting unidirectional links 21-1
displaying crash information 29-18
setting packet forwarding 29-16
SFP security and identification 29-8
show forward command 29-16
with CiscoWorks 25-4
with debug commands 29-14
with ping 29-9
with system message logging 24-1
with traceroute 29-12
trunking encapsulation 1-5
trunk ports
configuring
10-18
defined 8-3, 10-3
encapsulation 10-18, 10-23, 10-24
trunks
allowed-VLAN list
10-19
configuring 10-18, 10-23, 10-24
ISL 10-14
load sharing
setting STP path costs
10-23
using STP port priorities 10-22
native VLAN for untagged traffic 10-21
parallel 10-23