Release Notes for Cisco Catalyst Blade Switch 3020 for HP, Cisco IOS Release 12.2(50)SE and Later

19
Release Notes for the Cisco Catalyst Blade Switch 3020 for HP, Cisco IOS Release 12.2(50)SE and Later
OL-18274-02
Documentation Updates
Defaults Authentication debugging is disabled.
Command Modes Privileged EXEC
Command History
Usage Guidelines The undebug authentication command is the same as the no debug authentication command.
Related Commands
sync (Optional) Display operational synchronization authentication manager
debug messages.
vlan_assign (Optional) Display the VLAN-assignment debug messages.
voice (Optional) Display the voice-VLAN debug messages.
webauth (Optional) Display web authentication manager debug messages.
Release Modification
12.2(50)SE This command was introduced.
Command Description
authentication
control-direction
Configures the port mode as unidirectional or bidirectional.
authentication
event
Sets the action for specific authentication events.
authentication
fallback
Configures a port to use web authentication as a fallback method for clients that
do not support IEEE 802.1x authentication.
authentication
host-mode
Sets the authorization manager mode on a port.
authentication open Enables or disables open access on a port.
authentication
order
Sets the order of authentication methods used on a port.
authentication
periodic
Enables or disables reauthentication on a port.
authentication
port-control
Enables manual control of the port authorization state.
authentication
priority
Adds an authentication method to the port-priority list.
authentication
violation
Configures the violation modes that occur when a new device connects to a port
or when a new device connects to a port after the maximum number of devices
are connected to that port.
show
authentication
Displays information about authentication manager events on the switch.