Release Notes for Cisco Catalyst Blade Switch 3020 for HP, Cisco IOS Release 12.2(50)SE and Later

Release Notes for the Cisco Catalyst Blade Switch 3020 for HP, Cisco IOS Release 12.2(50)SE and Later

OL-18274-02

Documentation Updates

Error Message VQPCLIENT-2-TOOMANY: Interface [chars] shutdown by active host limit.

Explanation

The system has shut down the specified interface because too many hosts have requested

access to that interface. [chars] is the interface name.

Recommended Action To enable the interface, remove the excess hosts, and enter the no shutdown

interface configuration command.

Error Message VQPCLIENT-3-VLANNAME: Invalid VLAN [chars] in response.

Explanation

The VLAN membership policy server (VMPS) has specified a VLAN name that is

unknown to the switch. [chars] is the VLAN name.

Recommended Action Ensure that the VLAN exists on the switch. Verify the VMPS configuration by

entering the show vmps privileged EXEC command.

Error Message WCCP-5-CACHEFOUND: Web Cache [IP_address] acquired.

Explanation

The switch has acquired the specified web cache. [IP_address] is the web cache IP

address.

Recommended Action No action is required.

Error Message WCCP-1-CACHELOST: Web Cache [IP_address] lost.

Explanation

The switch has lost contact with the specified web cache. [IP_address] is the web cache

IP address.

Recommended Action Verify the operation of the web cache by entering the show ip wccp web-cache

privileged EXEC command.

Deleted System Messages

Error Message ACLMGR-2-NOVMR: Cannot create VMR data structures for access list

[chars].

Error Message DOT1X-5-INVALID_INPUT: Dot1x Interface parameter is Invalid on

interface [chars].

Error Message DOT1X-5-SECURITY_VIOLATION: Security violation on interface [chars],

New MAC address [enet] is seen.

Error Message DOT1X_SWITCH-5-ERR_VLAN_NOT_FOUND: Attempt to assign non-existent or

shutdown VLAN [dec] to 802.1x port [chars]